Waygate Technologies Calibration Blocks

• 3 blocks to choose from
• Provide a known target
• Used for instrument setup, transducer evaluation, and reference for evaluating flaw size

Waygate Technologies calibration blocks provide known targets that produce echo indications that are used for instrument setup, transducer evaluation, and reference for evaluating flaw size.

Waygate Technologies calibration blocks are available in three models:

Type 1 IIW

• Large angle beam calibration block
• 4.0 in (101.6 mm) radius for angle beam range calibration
• Measure beam index point and refracted angle
• Also used to check resolution and sensitivity

Type 2 IIW

• Same as IIW Type 1 with 2 in (50.8 mm) and 4 in (101.6 mm) radii for range calibration
• Side drilled holes also added for resolution check

AWS Type DSC Block

• Small block for angle beam distance and sensitivity calibration
• 1.0 in (25.4 mm) radius opposite a 3.0 in (76.2 mm) radius
• 0.375 in (9.5 mm) slot in the 3.0 in (76.2 mm) radius
• Also used to check beam index point and refracted angle

Waygate Technologies is formerly known as GE Inspection Technologies (GEIT)